Parting out 72 HT and possibily a 73 Cvtble

[BuickLover]

I'll try find someone to do pics but if you could just ask, that would be best for me since I also don't have equipment to post online pics.

BuickLover

[Austrian455]

I would need some parts:

-body side molding passeneger side on the door and front fender
-molding that holds the headliner up along the driver side glass
-the round corner of the vinyl top molding. I mean the molding on the lower end of the vinyl top.
-my car had no power windows, I bought a set of original power windows from a 4 door. the mechanism doesn´t fit der hardtop. so I only need the mechanism, not the motors.
-inside rear view mirror

I hope you can help me.

[Mickemustang]

Hi Buick lover

I need the buick emblem thats on the right hand side on trunk lid.
Also side moldings and 455 emblems both sides front fender..

And if possible, door knobs

all for my 73 convertible!

[Shibbyman8787]

I just bought my 72 Centurion a month ago. I am in the process of redoing the whole thing. I would love to have the dash mine is cracked. The dash parts too.

[SBRMD]

Austrian455: I have the vinyl top molding that you refer to, from the bottm of the vinyl, but it is from a 4dr. Don't know if they are the same. Might that help you?

Steve in Mpls, MN.

[Austrian455]

SBRMD: Thanks, but the parts from the 4dr don´t fit.
Do you have the side molding from the front fenter? (above the "centurion" emblem)

[SBRMD]

Don't have that one, sorry about that.

Good luck!

[cols73]

i'm looking for a front license plate holder for my 73.

[Robroy]

http://www.buickcenturion.com/forums/showthread.php?t=864

[hermanrodriquez]

I'm looking for a rear bumper for 1973 Centurion and a parade boot.

[WDR]

Do you have the stainless for the trunklid on the 73?

[Shibbyman8787]

Hello!

Do you have any original hubcaps? And do you have the transmission for parting out still? And do you have the dashboard?

[Greg Duesler]

NEED LEFT DOOR BODY SIDE MOLDING AND RIGHT REAR LOWER QUARTE MOLDING BEHING THE REAR TIRE, i ALSO AM LOOKING FOR A NICE SET OF HEADLIGHT DOORS AND A MOLDING THAT GOES ON THE LEFT REAR QUARTER PANEL, ON THE TOP EDGE WHERE THE CONVERTABLE TOP MEETS THE QUARTER PANEL
GREG

[Commander 18]

I'm looking for a glove box (the interior - not the door) for my '72 convertible. Also, 2 sill plates. Can you help?

[64tbird]

Hi, just came across this thread. If you have any parts left, I need:

1 original hubcap
1 Centurion nameplate for front fender
1 trunk emblem (rectangular, goes around trunk lock)
1 hood emblem (helmet in a circle)
left and right taillamp assemblies
right front wheel opening molding
right rear wheel opening molding
right rear quarter extension molding (goes from rear wheel opening to back bumper along bottom edge of body)

Thanks!

[SBRMD]

64tbird: I think I can help you out with a few of your items.

E-mail me your list and I'll check the garage.... sbrmd@aol.com

Best regards,
Steve.

[dreamcruise]

I'm still looking for the "CENTURION" nameplate for both front fenders for my
'71 convertible. Hope you can help. Dreamcruise

[Commander 18]

I'm looking for a glove box (the interior - not the door) for my '72 convertible. Also, 2 sill plates. Can you help?
Bump

[dreamcruise]

I don't have any items for sale. I only have one car, '71 centurion convertible.
I still need the CENTURION nameplate mounted on the front fenders. If anyone
can help, please contact me, thanks. dreamcruise

[Tampaturion]

This is Brian In Tampa I desperately need wiper switch, rain in forcast! 352-807-1164

[GS455_65]

do you still have the rubber bumper strips on the front and rear bars. Need a full set as mine have rusted away.:beers:

[streetcustomz]

I am looking for a back bumper in good condition for a 72 centurion. call me if you have one at 407-453-7362. thank you jimmy.

[regalt87]

Need passenger fender with corner light hole for a 72 limited. Scott. 863-557-6990