Parting 1972 Centurion

[32kCenturion]

Parted out a 72 Centurion 4 door. I have removed everything I could get off the car. I have sold alot of it but still have stuff left. let me know what you need. Larry in Florida 386-963-5348

[Smartin]

Trunk stainless?

[32kCenturion]

Wouldn't that be nice. Sorry but I don't have any trunk stainless.

[Smartin]

Had to ask:rolleyes: :o

[Eric B]

I need a front bumper for my 71 Electra. I think the 72's are different because they all had rubber on them. I thought I would ask.

[centurion 455 ragtop]

Trunk stainless?

hahahahahahahahahahahahahahahahahahahahahahahahaha hahhahahahahahhahahahahaha....sorry Adam, couldn't resit:D Just busting them on ya Pal.

Hope you find one.

[32kCenturion]

I have several nice bumpers that are correct for a 72 but none for a 71. Thanks, Larry

[nick rabi]

Larry,
Do you still have the taillight bezels??Do you have any pics of the front bumpers?
Thanks

[32kCenturion]

I have the left side tail lamp bezel and 2 front bumpers and 1 back bumper to choose from. I will try to get some pictures of them in the next few days. You may call me to discuss price, shipping and your email address for the pictures. Thanks, Larry 386-963-5348

[wmarble]

Do you have a power motor for the bench seat? I'm looking to replace one for a 1971 Centurion.

[32kCenturion]

Sorry, but I do not have a seat motor. It went with the seat to Buick Heaven.:rolleyes:

[FIRE72DROPTOP]

Larry,

Hi. Wondering if you might have a "CENTURION" fender emblem (don't require the '455' logo). Also...rear driver's side tailight lens?

I called you on both lines and left messages. firefighter1968@hotmail.com
905.717.8149.

abe

[Shrav]

I need a front bumper for my 71 Electra. I think the 72's are different because they all had rubber on them. I thought I would ask.

I replaced my chrome peeling 71 bumper with a 72. The 72 did have rubber and the holes in the bumper for them. I went to home depot and bought chrome carriage bolts and popped them in to "plug" them up. I'd rather have a 71 bumper but what the heck... it works! I can post a pic if the weather holds and I get the car out of the shed this weekend.

[SBRMD]

Need the passenger side, the kind that covers only the rocker (not part of the set that continues up the door).

Thanks in advance,
Steve.

[cardoneenyc]

Parted out a 72 Centurion 4 door. I have removed everything I could get off the car. I have sold alot of it but still have stuff left. let me know what you need. Larry in Florida 386-963-5348

i need the hood trunk lid if aval. call prince @ 6467255748 or email

[AlabamaBuickman]

I'm looking for an underdash fuse box for a 73 Centurian.
Chauncey (AlabamaBuickman)

[73 Centurion]

Hello,

Do you have the trim from the front fender that lives above the Centurion emblem? It should be stainless with a black rubber center.

Thanks,
John

[heavycenturion]

I'm looking for an underdash fuse box for a 73 Centurian.
Chauncey (AlabamaBuickman)
Chauncey,

I have a 72 two door centurion that has that fuse box.. Would it work for you?

Dennis

[ajesh35]

hello, how is the condition of the grill for lower bumper part,
also need crome molding that is below the turn signal

[heavycenturion]

hello, how is the condition of the grill for lower bumper part,
also need crome molding that is below the turn signal

I don't have those parts.

[hermanrodriquez]

Larry - I'm looking for the wood seat back for the rear bench seat back. Please let me know if you have this.
Thanks

[32kCenturion]

Not sure what this part is that you need but if it has to do with the seats, they are gone. I still have alot of small parts. I have an old chest freezer full to the top with misc. 72 parts. I have 2 front bumpers and 1 rear bumper.

[Smartin]

The back side of the upper back seat portion is made of a hard board material that has 3 slots in the top where it hooks to the rear seat brace, and also has two metal brackets attached to the bottom corners that have bolts running through them to the body. These can get worn/broken at the hook slots if the seats are removed often or sat on from the top.

[regalt87]

I spoke with Larry and he gave me a couple good leads, but still need a passenger fender for a 72 with corner light. and now the owner wants a extra set of hub caps.

Scott 863-557-6990

[sbxtc]

If they fit a '72 convertible, I would be interested in the front grille, the hood latch assembly (bottom portion that attaches in front of radiator), and the rubber impact strips (both sides) off the front bumper. LMK.

Thanks,

Sebastian
239-821-1313